BLOG
Stabilizing Knits
Even really good sewers are afraid of knits. They're afraid of the knit stretching and not being able to control it. Right from the get-go, you want to build in some stabilizing. In this video, I show you how to add fusible tricot to shoulder seams. It will keep your neckline from stretching while you work. Use a lightweight tear-away stabilizer like Totally Stable on the underside of the dart to keep the narrow fold of the dart smooth and the stitches even. This will prevent stretching and keep the end of the dart from being sucked down into the needle hole. You can change the stitch length to small stitches for the last 1/2 inch at the tip of the dart to secure the threads without the need to tie them off. I work on a tailor's ham a lot. I press the dart flat to blend in the stitches. Then you want to press your darts, going up. It will give a more youthful appearance, as you wear it. Remember that you want to make your darts as invisible as possible; all but disappearing when you wear your garment. Sewing with the interfacing on top will keep your fabric from stretching, buckling, and puckering as you sew. Threading your pins through before you begin will help to hold your pieces in place. After stitching, press each of the shoulder seams flat and then open, toward the back, to further set the seams. You can use any width double needle. I prefer the 4.0mm #12/80 size. You can wind wooly nylon in the bobbin, and use black for dark colors, and beige for light. The wooly nylon in the bobbin keeps the knit from stretching in most cases. BUT…if you see your fabric stretching, use stay stitching and as you sew, apply pressure to the back of the presser foot, using one finger and an even tension. The potential for knit sleeves growing as you work with them is very real. But little sticky dots along with fusible web (pressed in the stable vs. stretchy direction) for the entire length of the sleeve can help you avoid this problem.
Learn more
Sewing & Pressing Tips for Velvet
Sewing Velvet Mark with tailor’s tacks.Use embroidery thread—it doesn’t pull out easily. Take one stitch only through both layers of the fabric, leaving ¾” tails. Then gently separate the layers and clip the threads to mark both sides cleanly. This traditional method keeps markings visible without bruising the pile.Or, mark with a dressmaker’s pencil.Make a small dot at each marking. To deepen the color and help it last, lick the pencil tip lightly before marking. This simple trick adds contrast on plush or dark fabrics.Prevent shifting as you sew.The biggest challenge with velvet is keeping the layers from moving. The best solution is to use a walking foot in combination with a temporary spray adhesive such as 505 Spray.Apply adhesive correctly.Cover your work surface with paper, and carefully mask off the seam allowance with strips of paper. Spray a light, even coat of adhesive within the seam allowance only. Then align the edges, right sides together, and stitch as usual.A couture secret revealed.It’s a little-known secret of couture houses that seamstresses have relied on similar spray adhesives for years to stabilize velvet and other delicate fabrics. The result: smooth seams, aligned pile, and professional finish—fast, effective, and beautifully precise. Pressing Velvet Keep a light hand.Velvet demands delicacy—press, don’t press down. Let the heat and steam do the work rather than pressure from the iron.Use plenty of steam.Generous steam helps relax the pile and set seams without crushing the fabric’s surface. Hover the iron just above the velvet.Finish with a clapper.After steaming, lightly press with a clapper to lock the shape in place as the fabric cools. It sets the seam beautifully while preserving that soft, dimensional sheen velvet is known for. Happy Sewing!
Learn more
Core Wardrobe Outfit Contest Winner
Congratulations Eve Kovacs, the winner of a $200 gift card in Marcy's Core Wardrobe Outfit Contest.
Learn more
Core Wardobe Contest
As we wrap up our Core Wardrobe series, we hope that our ideas have inspired new ideas for you. To celebrate, I am excited to bring you an opportunity to showcase your sewing talents for a chance to earn a $200 gift card. It’s time to Sew & Tell! We’re celebrating the finale of our Core Wardrobe series with an Outfit Contest—your chance to showcase the creativity and craftsmanship that make our community shine. Photograph an outfit made by you from your Core Wardrobe (minimum of 3 pieces), and email your photos to outfit@marcytilton.live.Prizes are simple: $100 for Marcy’s favorite outfit, and $200 if it’s made with Marcy Tilton fabrics. Enter as many outfits as you like, and remember that photography counts.Here are some hints to help you win. Photograph your outfit on you, a friend, a model, a dress form, or hung/flat—all on a plain background. Keep it simple and clear so that your sewing skills shine!Entries are due by October 24. I will announce the winner from Paris on November 1 and feature the winning outfit on my blog.
Learn more